DaXiLi spegel
Working time: 30 mins to one hour
Total time: 1 to 1½ hours
Skill level: Easy
Removing a wall mirror that’s glued to a wall can be tricky because improper handling can lead to injury or damage to the wall. Here’s a step-by-step guide to help you remove it safely:
Tools and Materials Needed:
Utility knife or razor blade
Heat gun or hairdryer
Plastic putty knife or scraper
Safety goggles and gloves
Drop cloth or old blanket
Painter’s tape (optional)
Steps to Remove the Mirror:
1. Prepare the Area
Place a drop cloth or cardboard beneath the mirror to catch any falling glass or debris.
Apply painter’s tape across the mirror in a crisscross pattern to minimize shards in case it breaks.
2. Loosen the Adhesive with Heat
Use a hairdryer or heat gun on a low setting to heat the edges of the mirror.
Move the heat evenly along the edges for a few minutes to soften the adhesive.
3. Use Fishing Line or Wire
Slide a piece of fishing line or thin wire behind the mirror.
Use a sawing motion to cut through the adhesive as you work your way from top to bottom.
4. Gently Pry the Mirror
Once the adhesive has been loosened, insert a putty knife or pry bar gently behind the mirror.
Apply steady, even pressure to avoid cracking the mirror. Work slowly around the edges.
5. Remove Remaining Adhesive
After the mirror is removed, scrape off any leftover adhesive with a putty knife.
Use an adhesive remover or warm soapy water to clean the wall thoroughly.
Tips and Warnings:
Safety First: Always wear safety goggles and gloves to protect against broken glass.
Avoid Excessive Force: Forcing the mirror off may cause cracks in the wall or break the mirror.
Work Slowly: Patience is key—rushing can result in accidents or damage.
Seek Help: Large mirrors may require two people to handle safely.
If the adhesive is particularly stubborn or you’re unsure about the removal process, consider hiring a professional.